Quality drifted between sample and bulk
The proto was right. The bulk was not. Usually because the sampling unit and the production floor were the same people under different pressure.
Price is easyto promise.Predictability is not.
Denim, ethnic and woven, made on our own floors in Dombivali. Design, sampling and bulk under one roof, with one merchandiser accountable from tech pack to dispatch, and a standing rule that you hear about a problem from us, not from your own chase mail.
request a quotedenim
Ethnic
capability profile
woven & knits
You are probably herebecause something broke.
Nobody changes factory without a reason. These are the reasons brands tell us about most.
Quality drifted between
sample and bulk
The proto was right. The bulk was not. Usually because the sampling unit and the production floor were the same people under different pressure.
The date moved, and
nobody told you
You found out the shipment had slipped when you chased it, not when it happened. By then the retail window had closed.
Too many people, no
one accountable
An agent, a factory and a QC service, each pointing at the other two when something goes wrong.
Compliance turned up
as a problem later
The audit request came from your buyer, and the factory started the paperwork after the order was placed.
80,000
monthly capacity
30-45 Day
Turnaround cycle
99.2%
on-time delivery
200
minimum pcs per style
The skill was never in question.
The certainty was. So that is what we built the company around.
Four things thatare structural,not promises.
Compliance from day one
SEDEX-registered and audited by Intertek. MPCB approved. MIDC licensed. Fire NOC obtained. MSME and IEC registered. All of it before our first client order, so your vendor due diligence comes off the critical path instead of onto it.
01
Denim is the core. We will tellyou when something is not.
Denim
A dedicated floor, a dedicated R&D team, and category leadership from Raymond, Spykar and Killer Jeans.
Core strength
Ethnic wear
Production leadership has independently run end-to-end ethnic and womenswear operations.
Core strength
Woven
Well established across the factory network, on a dedicated floor.
Core strength
Also
Supported
Knits
active wear
kids wear
Private label, fully supported
One site, two dedicated floors, MIDC Dombivali.
A 128-machine stitching floor built on Brother, Vi.Be.Mac, Typical, Kansai Special and Kaiyu, covering lockstitch through feed-off-the-arm. Cutting, buttonholing, bartacking, Italian vacuum pressing and fusing all happen in-house, which is how output leaves here export-ready rather than needing a second stop.
13,000+
sq. ft.
100+
karigars
155+
machines
1,800
pcs / day peak
What we do not do in-house
Washing, dyeing and finishing run through partners. Everything from cutting to final pack happens on our floor.
Download the capability deck
Five stages. Youare told where youare at each one.
Most factories go quiet between your PO and your shipment. This is the sequence we run, what moves it forward, and what you receive at each stage.
[01]
Send the brief
A sketch and a reference sample are enough to start. Brand, category, quantity, size range, target price and delivery window get us to a workable interpretation. A tech pack, if you have one, moves it faster.
[02]
Sampling
Proto, fit and PP, with two revision rounds included. Run in the separate sampling unit, so bulk never blocks it. Physical courier for final sign-off, photo and video for quick calls during development.
[03]
Fabric and trims
Cotton-led from reputed mills. Organic, recycled and performance fabrics available. Client-supplied fabric accepted. Trims, labels and packaging sourced and managed by us.
[04]
Bulk and QC
Inline and end-of-line inspection. Weekly stage-wise updates by WhatsApp and email: cutting, stitching, finishing, packing. If a date comes under pressure, you hear it from us with the reason and a revised plan, not from your own chase mail.
[05]
Pack and dispatch
Branded labels, hangtags, poly bags and cartons. Full export documentation. FOB for export, Ex-Works for domestic, CIF or DDP by agreement.
Send the brief. Sample inhand inside two weeks.
No obligation to commit to bulk before you see the proto. Review the quality and fit
first, then decide with confidence.
Proof, in whowe make for.
Bulk
delivered for
The questions asourcing manageractually asks.
From 200 pcs per style at our smaller unit, 350+ at the larger one, 400 as the network standard. Below roughly 1,000 pcs per style the per-unit cost stops being competitive and we will tell you so rather than quote you anyway. The programmes that work best for both sides sit around 10,000 pcs per style
5–7 working days from first contact to a sample being initiated. From there, proto runs 7–10 working days from brief approval and material receipt, fit 7–10 working days from your comments, and PP 7 working days from fit approval with bulk fabric and trims confirmed. Two revision rounds are included. In practice we often run inside these; we publish the outer figure because a date you can beat is worth more to you than a date we can hit on a good week.
Yes: buttons, zippers, labels, hangtags and threads, plus poly bags, cartons and retail-ready packaging. Custom trims run 3–4 weeks
Yes, fully. Custom labels, hangtags, packaging and cartons under your brand.
Weekly stage-wise updates by WhatsApp and email, plus a shared tracker on larger programmes. If a delivery date comes under pressure, you hear it from us immediately with the reason and a corrective plan.
Shein, Max Fashion, Snitch, Royal Enfield, Style Bazaar and Style Union have all run bulk on our floors, each named here with their permission. We started production in 2025, so these are completed programmes rather than a decade of tonnage. Ask us for the one closest to your category and we will put you in touch.
Typically 30–45 days from PO to shipment-ready, driven by order size, style complexity and raw material readiness. A repeat style with fabric already in house runs closer to 25 days; a new development with sourcing dependency can run to 60. Denim bulk runs 45 days from receipt of bulk fabric. We commit to a specific date per order once fabric and trims are confirmed, and not before.
Yes, charged separately and adjustable against bulk once MOQ is met. Sampling runs on the basis of a bulk commitment.
Yes. Cotton-led from reputed mills, with organic, recycled and performance options. 750 m MOQ per fabric. We also work with client-supplied fabric.
No. Washing, dyeing and finishing run through partners. Everything from cutting to final pack happens on our floor.
FOB for export, Ex-Works for domestic dispatch, CIF or DDP by agreement. You can use your own forwarder or we can coordinate dispatch.
Start with a brief.Finish witha sample.
312, Shrushti Plaza, Saki vihar road,
Andheri (east) Mumbai - 400076
© 2026 Ellwinkz. All rights reserved.
Price is easyto promise.Predictabilityis not.
Denim, ethnic and woven, made on our own floors in Dombivali. Design, sampling and bulk under one roof, with one merchandiser accountable from tech pack to dispatch, and a standing rule that you hear about a problem from us, not from your own chase mail.
You are probably herehere because something broke.something broke.
Nobody changes factory without a reason. These are the reasons brands tell us about most.
The date moved, and nobody told you
You found out the shipment had slipped when you chased it, not when it happened. By then the retail window had closed.
Too many people, no one accountable
An agent, a factory and a QC service, each pointing at the other two when something goes wrong.
Compliance turned up as a problem later
The audit request came from your buyer, and the factory started the paperwork after the order was placed.
Reason 01 of 04
80,000
monthly capacity
30-45 Day
Turnaround cycle
99.2%
on-time delivery
200
minimum pcs per style
The skill wasnever in question.
The certainty was. So that is what we built the company around.
Four things thatare structural,not promises.
01
Compliance from day one
SEDEX-registered and audited by Intertek. MPCB approved. MIDC licensed. Fire NOC obtained. MSME and IEC registered. All of it before our first client order, so your vendor due diligence comes off the critical path instead of onto it.
02
Sampling does not share a floor with bulk
A separate sampling-only unit. Your development does not queue behind someone else's shipment, and your bulk does not stall for someone else's proto. This is a floor plan, not a service level.
03
One merchandiser, start to finish
A single point of contact from enquiry to dispatch. WhatsApp for daily pace, email for approvals, costings and documents, a shared tracker on larger programmes. No agent, no buying house, nobody to point at when something goes wrong.
04
Cutting to final pack happens here
Not brokered across three sites. Cutting, stitching, buttonholing, bartacking, Italian vacuum pressing, fusing and packing all on our own floors. Washing, dyeing and finishing run through named partners; we say so rather than implying otherwise.
Denim is the core.We will tell youwhen somethingis not.
Denim is the core. We will tellyou when something is not.
Core strength
Denim
A dedicated floor, a dedicated R&D team, and category leadership from Raymond, Spykar and Killer Jeans.
Core strength
Ethnic wear
Production leadership has independently run end-to-end ethnic and womenswear operations.
Core strength
Woven
Well established across the factory network, on a dedicated floor.
Also
Supported
Knitsactive wearkids wearPrivate label, fully supported
One site, twodedicated floors,MIDC Dombivali.
A 128-machine stitching floor built on Brother, Vi.Be.Mac, Typical, Kansai Special and Kaiyu, covering lockstitch through feed-off-the-arm. Cutting, buttonholing, bartacking, Italian vacuum pressing and fusing all happen in-house, which is how output leaves here export-ready rather than needing a second stop.
13,000+
sq. ft.
155+
machines
100+
karigars
1,800
pcs / day peak
What we do not do in-house
Washing, dyeing and finishing run through partners. Everything from cutting to final pack happens on our floor.
Download the capability deckFive stages.You are told whereyou are at each one.
Most factories go quiet between your PO and your shipment. This is the sequence we run, what moves it forward, and what you receive at each stage.
Send the brief
A sketch and a reference sample are enough to start. Brand, category, quantity, size range, target price and delivery window get us to a workable interpretation. A tech pack, if you have one, moves it faster.
Sampling
Proto, fit and PP, with two revision rounds included. Run in the separate sampling unit, so bulk never blocks it. Physical courier for final sign-off, photo and video for quick calls during development.
Fabric and trims
Cotton-led from reputed mills. Organic, recycled and performance fabrics available. Client-supplied fabric accepted. Trims, labels and packaging sourced and managed by us.
Bulk and QC
Inline and end-of-line inspection. Weekly stage-wise updates by WhatsApp and email: cutting, stitching, finishing, packing. If a date comes under pressure, you hear it from us with the reason and a revised plan, not from your own chase mail.
Pack and dispatch
Branded labels, hangtags, poly bags and cartons. Full export documentation. FOB for export, Ex-Works for domestic, CIF or DDP by agreement.
Send the brief.Sample in handinside two weeks.
Send the brief. Sample inhand inside two weeks.
No obligation to commit to bulk before you see the proto. Review the quality and fit first, then decide with confidence.
Proof, in whowe make for.
Bulk delivered for
The questions asourcing manageractually asks.
From 200 pcs per style at our smaller unit, 350+ at the larger one, 400 as the network standard. Below roughly 1,000 pcs per style the per-unit cost stops being competitive and we will tell you so rather than quote you anyway. The programmes that work best for both sides sit around 10,000 pcs per style
Typically 30–45 days from PO to shipment-ready, driven by order size, style complexity and raw material readiness. A repeat style with fabric already in house runs closer to 25 days; a new development with sourcing dependency can run to 60. Denim bulk runs 45 days from receipt of bulk fabric. We commit to a specific date per order once fabric and trims are confirmed, and not before.
5–7 working days from first contact to a sample being initiated. From there, proto runs 7–10 working days from brief approval and material receipt, fit 7–10 working days from your comments, and PP 7 working days from fit approval with bulk fabric and trims confirmed. Two revision rounds are included. In practice we often run inside these; we publish the outer figure because a date you can beat is worth more to you than a date we can hit on a good week.
Yes, charged separately and adjustable against bulk once MOQ is met. Sampling runs on the basis of a bulk commitment.
Yes: buttons, zippers, labels, hangtags and threads, plus poly bags, cartons and retail-ready packaging. Custom trims run 3–4 weeks
Yes. Cotton-led from reputed mills, with organic, recycled and performance options. 750 m MOQ per fabric. We also work with client-supplied fabric.
Yes, fully. Custom labels, hangtags, packaging and cartons under your brand.
No. Washing, dyeing and finishing run through partners. Everything from cutting to final pack happens on our floor.
Weekly stage-wise updates by WhatsApp and email, plus a shared tracker on larger programmes. If a delivery date comes under pressure, you hear it from us immediately with the reason and a corrective plan.
FOB for export, Ex-Works for domestic dispatch, CIF or DDP by agreement. You can use your own forwarder or we can coordinate dispatch.
Shein, Max Fashion, Snitch, Royal Enfield, Style Bazaar and Style Union have all run bulk on our floors, each named here with their permission. We started production in 2025, so these are completed programmes rather than a decade of tonnage. Ask us for the one closest to your category and we will put you in touch.
Start with a brief.Finish witha sample.
© 2026 Ellwinkz. All rights reserved.